1. Click "Start" at the bottom left corner of the screen
2. Click "Run"
3. Type in "command" and press OK
2. Click "Run"
3. Type in "command" and press OK
Now you are at an MSDOS prompt screen.
4. Type "ipconfig / release", and press Enter
5. Type "exit" and press Enter, to P rompt MSDOS has been closed.
5. Type "exit" and press Enter, to P rompt MSDOS has been closed.
6. Click "Start" Select "Control Panel" Select "Network and Internet" and Select "Network and sharing"
7. Select "Change Adapter Settings" then "Enter"
8. There we will find "Local Area Connection" and then right click and select "Properties"
9. Click 2x on "Internet Protocol (TCP / IP)" from the list on the tab "General"
10. Click on " Use the Following IP address " on the tab "General"
11. Create an IP address (Whatever you want to browse, tebakin only).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" with default numbers. (255.0.0.0)
13. Press "Ok" 14. Right click on "Local Area Connection"
9. Click 2x on "Internet Protocol (TCP / IP)" from the list on the tab "General"
10. Click on " Use the Following IP address " on the tab "General"
11. Create an IP address (Whatever you want to browse, tebakin only).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" with default numbers. (255.0.0.0)
13. Press "Ok" 14. Right click on "Local Area Connection"
15. Click the "P roperti" again. 16. Back to the "TCP / IP "
17. This time, select " Obtain an IP address automatically "Press" Ok "
19. Press "Ok" again
20. Well now You have a new IP address
With a little practice, You can easily change the IP with a short time ..
17. This time, select " Obtain an IP address automatically "Press" Ok "
19. Press "Ok" again
20. Well now You have a new IP address
With a little practice, You can easily change the IP with a short time ..
In addition to trying 
0 comments: